Description

Cybertruck Display Back Overlay (2 Pieces)

Real Dry Molded Carbon Fiber

 Elevate your Cybertruck’s cabin with a sleek carbon fiber screen upgrade. Upgrade the rear appearance of your Cybertruck’s center screen with our Dry Molded Carbon Fiber Display Back Overlay.

Performance & Aesthetics

Precision Engineered Fit

Precision-molded using a 3D scan of the Cybertruck’s center display rear, ensuring factory-like integration with **zero gaps or alignment issues** for a truly OEM look.

Real Dry Molded Carbon Fiber

Made from premium autoclave **dry molded carbon fiber** for maximum strength, lightweight durability, and a luxurious, high-end finish that surpasses standard wet lay-up carbon.

Damage-Free Installation

Installs easily by securing with pre-applied **automotive-grade double-sided tape**—ensuring a clean, damage-free, and permanent fit that won’t require screen removal or complex disassembly.

Installation Guide (Quick 5-Minute Install)

1. Clean the surface: Use a cleaning cloth to thoroughly clean the back of the display and ensure it is completely dry.
2. Peel off the backing film: Peel off the backing film from the pre-applied adhesive tape on the carbon fiber part.
3. Align the top: Carefully align and attach the **top** carbon fiber part to the back of the display screen.
4. Press and fix: Press firmly for 30 seconds. Repeat this alignment and pressing step for the **bottom** part.
   5.
5. Wait: Avoid high temperatures or washing with water within 24 hours to allow the glue to fully cure.

FAQ

Is the installation easy, and are any tools required?

+

Yes, the installation is designed to be simple and requires **no specialized tools**. The overlays secure easily with pre-applied, automotive-grade double-sided tape (included with a prep kit). The process involves cleaning, aligning, and pressing firmly.

What is the difference between Glossy and Matte finishes?

+

The Glossy (Wet Look) finish has a high-shine, reflective surface protected by a clear coat. The Matte (Dry Look) finish has a non-reflective, satin appearance, which is better for minimizing glare and matching the minimalist OEM aesthetic.

Is the installation permanent? Can I remove it later?

+

The automotive-grade adhesive is designed for a secure, long-lasting hold. While it can be removed with careful application of heat (e.g., a hairdryer), it is intended to be a permanent upgrade, and removal should be done cautiously to avoid damage to the underlying plastic.