Description
Liberty Pumps 287-2 is a 1/2HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 25ft power cord. Turn-on level of the not adjustable switch is 9-1/2″ and turn-off level is 4″. This pump can operate in a smaller 10″ diameter sump pit.
The Liberty Pumps 287-2 has 1-1/2″ NPT discharge, 3/4″ solids-handling, 37′ shut-off head, a unique one-piece cast iron housing and thermally protected & permanently lubricated motor.
Liberty Pumps 287-2 is a 1/2HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 25ft power cord. Turn-on level of the not adjustable switch is 9-1/2″ and turn-off level is 4″. This pump can operate in a smaller 10″ diameter sump pit.
The Liberty Pumps 287-2 has 1-1/2″ NPT discharge, 3/4″ solids-handling, 37′ shut-off head, a unique one-piece cast iron housing and thermally protected & permanently lubricated motor.
This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 281 and 283) are better suited for effluent applications and are easily adjustable for different On/Off levels.
For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.
CAUTION: Do not let the pump run dry.
Applications:
For Sump and De-watering Applications only.
Features:
- Vortex style impeller permitting passage of solids up to 3/4″
- 416 stainless steel rotor shaft
- Permanently lubricated upper and lower ball bearing
- Carbon and ceramic mechanical face seal
- Epoxy powder coat finish
- All fasteners – corrosion-resistant stainless steel
- 1-1/2″ Discharge
- Stainless steel bottom screen – easily removable
- Quick-disconnect 25′ standard power cord
- Maximum fluid temperature: 140°F
Technical Specifications:
- Horsepower: 1/2 HP
- Cord length: 25′
- Discharge: 1-1/2″
- Solids Handling: up to 3/4″
- Shut-off Head: 37′
- Voltage: 115V
- RPM: 3450
- Amps: 8.5
- Hertz: 60 Hz
- Phase: 1
- Maximum fluid temperature: 140°F
- Height: 13″
- Width: 10″
- Weight: 29 lbs.
- Minimum sump pit diameter: 10″
- Minimum sump pit depth: 14″
Warranty:
3 years manufacturer’s warranty
Reviews
There are no reviews yet.