Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35' cord, 1/3 HP, 115V
Sale!

Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35′ cord, 1/3 HP, 115V

Original price was: $297.75.Current price is: $74.43.

SKU: 2533 Category:

Description

The Liberty Pump 253-3 is an automatic, submersible effluent/sump pump that comes with a 35-ft. power cord and has a shut-off head of 23′. It has a 1-1/2″ discharge and can handle solids up to 1/2″. This Liberty effluent/sump pump also has a 1/3HP motor that can produce a flow rate of 36 GPM at 10′ and includes a wide-angle float switch. This switch has an “ON” level at 11″ and “OFF” level at 4.2″ and features a piggy-back plug allowing for manual operation. This effluent sump pump is ideal for pumping of drainage, effluent and waste water and other non-explosive/corrosive liquids.

The Liberty 253-3 effluent sump pump operates at 115V, 5.2 Amp and 60 Hz with a maximum fluid temperature of 140F. This Liberty sump/effluent pump is the perfect choice for low-head effluent pumping or basement de-watering applications, as well as liquid waste transfer for residential or commercial applications that require more flow at low-head. The powerful heavy-duty motor on the Liberty 253-3 effluent sump pump comes with a rugged housing and powder coat finish that is completely submersible and will provide years of reliable performance.

Features:

  • Vortex style impeller permitting passage of solids up to 3/4″
  • Cast bronze or cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • 1/3 HP shaded pole motor with thermal overload protection
  • Stainless steel fasteners
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for protection against pump failure
  • Upper and lower sintered sleeve bearings for extended motor life
  • Automatic operation with piggyback mechanical float switch with “ON” level at 11″ and “OFF” level at 4.2″

Technical Specifications:

  • Discharge Size: 1 1/2″ FNPT
  • Solids Handling Capability: 1/2″ dia.
  • Listing: UL/CSA
  • HP: 1/3
  • Volts: 115
  • Phase: 1
  • Hertz: 60
  • Amps: 5.2
  • Flow @ 5′: 45 GPM
  • Flow @ 10′: 38 GPM
  • Flow @ 20′: 14 GPM
  • Thermal overload temp: 248F
  • Shut-off Head: 23′
  • Cord Length: 35′
  • Height: 10.5″
  • Major Width: 9.6″
  • Weight: 24 lbs

Warranty:
3 years manufacturer’s warranty

Reviews

There are no reviews yet.

Be the first to review “Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35′ cord, 1/3 HP, 115V”

Your email address will not be published. Required fields are marked *